4.0M width silicone rubber sheet without joint

silicone rubber sheet Silicone rubber is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongating and tear strength, however they keep constant even at high temperatures but should not be used with high pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat (dry air), at +250°C intermittent. It remain flexible at low temperatures of -70°C and it is also resistant to ultra-violet light, Ozone and weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties. Specifications Silicon rubber sheet; FDA certificated by SGS, High tear resistance, Width:<4M Tensile strength: 7Mpa or 9Mpa Silicon rubber sheet; FDA certificated by SGS, High tear resistance, Width:<4M Tensile strength: 7Mpa or 9Mpa We could supply two kinds of silicon rubber sheet: 1.Common food grade silicon rubber sheet; FDA certificated by SGS, Gravity/density: 1.25g/cc Tensile strength: 7Mpa Elongation: 320% Tear resistance: 18KN/M Colour: semi-transparent, transparent, red, blue etc.; Thickness:1mm-20mm Width:<4M Length: any 2.High tear resistance silicon rubber sheet: Gravity/Density: 1.25g/cc, 1.3g/cc Tensile strength: 9Mpa Elongation:720% Tear resistance: 32KN/M Colour: grey, transparent, blue etc.. Thickness:1mm-20mm Width:<4M Length: any Specifications silicon rubber sheet high tear-resistant, maximum width can be 3800mm with no joint Product use: It is used for solar energy laminating machines, etc. Product features: Keqiang adopts advanced techniques and special equipment, large drum-type vulcanization unit to develop the high tear-resistant silicon rubber sheet, which has a high level of stability, a good evenness and reliability, and its heat resistant up to 250°C Product specification: 1) common thickness: 3mm,5mm 2) maximum width: 3800mm 3) any length 4) common color: transparent, grey, and any color available The technical index: Model number FC1112 FC1132 FC1111 FC1131 Hardness(Shore A) 50 50 50 50 Breaking strength (Mpa) 12 12 12 12 Breaking extensibility % 720 720 720 720 Tearing strength N/mm meniscus method 42 42 42 42 rectangular method 32 32 32 32 Linear shrinkage rate % 3.6 3.6 3.6 3.6 Long run temperature 230 230 230 230 Appearance(color) Transparent One smooth One cloth grain Grey One smooth One cloth grain Transparent Two sides smooth Grey Two sides smooth